Blog: January 2013

2012 moving picture show

 

better late then never I guess. finally got some of my footage from the 2012 season together. I didn't seem to remember I owned cameras last year. I'd forget them at home, forget to charge batteries, or my favorite - forget to turn it on when it's on your head! sometimes you get too focused on what you're about to do and you forget about the little box on your head. but sometimes it's good to just have your own memories.

enjoy

jl

good morning -28C!

woooo. was a little chilly this morning. thanksfully there was no wind so wasn't actually really all that bad. or maybe I grew up in this type of weather a few hours south of here so I know what to wear. However, even waxing with the coldest wax known to man it only took a few runs for the snow to rip into my base. The photo below is the base of the board I had stone ground yesterday. It looked new this morning and now not so new. The little black shadow line where the edge and ptex meet is actually a divet where the ptex has been chewed away by the snow.

no sense in trying to stone grind this guy again. I'm going to run it for practise then hop on my other board for the contest runs. hopefully thats going to work out and not rip apart my other board as well. Pipe is pretty good, just bullet proof icy as you can image from it raining this past weekend to -28 today. qualifiers are tomorrow at around noon for the guys and in the morning for the ladies.

it being so cold today, my phone wasn't wanting to cooperate but I managed to snag a phot of my Finnish friend markus malin cruisin through the pipe. granted it is a serious phone shot..

 

 

world championships; the back end..

Made it to the FIS world championships in quebec. Psyched to be competing in yet another world championships (there's been quite a few!). I had some politics to deal with prior and after showing up here, but we're onto the business of competing. Being out in quebec you need to get ready for anything and everything weather wise. last week, i heard the snow as great. on the weekend it poured rain. tomorrow it's going to be -30! yeah it's a little icy, and a wee bit cold.

The cold snow wrecks havoc on your base. What happens with cold snow is the crystals are very, very sharp. In halfpipe we carry quite a bit of speed through the flat bottom and we hold the same edge for quite a while. So those sharp little crystals dig into you base. As you take more and more runs, your base actually starts to get noticebly chewed up by these crystals. Having an event in copper last week (where the snow is cold) then followed up by here basically ruins 1 or 2 boards. Today the board I was riding had finally had enough and the ptex base was not only chewed up, it had gotten so bad that the ptex was actually lower than the steel edge. When this happens your board becomes very twitchy and digs in at unexpected times. I had some troubles on my heelside today and when i saw that on my base I quickly put the 2 together.

After practise, my good friend and old temate Hugo Lemay took me down to a race ski shop that he knew had a good stone grinding machine. The tech had never seen a base so chewed up in his life. I told him to grind it down as much as possible to get the base and edge back to being flat. Having designed the boards I'm on I knew exactly how thick the ptex was and figured there would be enough to get it back into shape.

After the sweet stone grind, the real work started. When we have a new board or a fresh base, generally we will 'feed' the base with wax. I follow a feeding program that I've worked out over the years, but it takes a good deal of coats to get a board ridable. 3 hours of work waxing and tuning the edges. usually I'll be in the tuning area for a while but 3 hours is a very long while to be working on primarily 1 board.

 

some tools of the waxing trade. When the racers show up the tuning room becomes much more crowded and serious it seems.

 

Tuning is a key component of doing well in contests these days. last week I made a mistake and used a new file guide while tuning my edges for the conetst day and it was different than my old guide and my board rode like poo. This week I'm back to my old file guide. Little things at this level can ruin your contest. Hopfully I learned from my mistakes last week, and my work tonight will have my boards running like they should be.  

 

 

catching up..

geez, having a kid kinda sets you back on some stuff. like my website..

it's the middle of january already and it feels like it started snowing yesterday. This season is setting up to be interesting. So far I've passed a level 1 guide's course, competed in a world cup, shot for a noboard/powsurfing article, toured a bunch and started on a project with arcteryx (more to come on that)

Guide's course was sweet. lots of avalanche rescues, crevasse rescues, a day in a cat, a day in a bird, and lots of digging in the snow!

being rescued.

The world cup was at Copper mtn last week. I didn't have the time or resources early season to head to colorado (and there was no december contest there this year) so showing up for the world cup I hadn't ridden pipe at all. Had a few days prior to the comp and things were looking pretty good. until the contets day where I screwed up my tuning! yeah. rarely do I mess up my tuning on contest day but last week I definitely screwed the pooch on my edges in particular. I'd bought a new file guide for my edges that is supposed to be the same as my old one, but I think it makes a slightly sharper edge which I'm not fond of. So when I started dropping in for practise my board was all over the place. Just not tracking right and super hooky. It sucks. Couldn't make it past the second hit. At first I thought it was the cold snow, but as I dropped ina few more times i started to realize it was my board. fairly quickly I figured out where the problem was with my edges and borrowed a diamond stone to try and fix it. couple runs later still not fixed. I then swapped boards and my other board had the same problem, but not quite as bad. uhhhh! fixed that one just in time for practise to be over. very frustrating. My plans for the contest were not materializing in the least seeing as I had trouble getting past my second hit and hadn't done anything more in practise than a frontside 720. Thankfully I learned quite a while ago to trust my riding and somehow linked together 2 different runs and made it to the bottom of the pipe. I'm not saying those runs were awesome (I finished dead middle of the field), but having gone from not landing anything to landing something is good for the mental state. but I wasn't making finals so I bolted to get back home to be with my family.

 

i took the little guy for his first turns over xmas

and his first touring day yesterday..

powsurfing

noboard and powsurf drops! great few days without bindings

some front yard booter action at my parent's over xmas

and lots of touring to get to spots like this!

currently in quebec to compete at the world championships then it's back home and on the touring program. lots of mountains to ride!

Subscribe to Blog: January 2013